Burbank Airport ATC Zero — Multiple Planes Land Without Control Tower Staff

Burbank Airport ATC Zero

Multiple aircraft landed at Burbank Airport without a single air traffic controller in the control tower, raising severe safety concerns.

According to KTLA reports on the 19th, tower communications were cut off after Burbank Airport controllers declared ‘ATC Zero’ on the evening of the 18th. ATC Zero refers to a situation where the relevant air traffic control facility is unable to perform normal air traffic control operations.

Aviation news outlet Simple Flying reported that the control blackout occurred in at least two separate instances, each lasting about 30 minutes.

During the incident, pilots approaching or moving on the ground at the airport used the Common Traffic Advisory Frequency (CTAF) instead of control tower frequencies to share their positions and movement plans to coordinate operations. The Southern California Terminal Radar Approach Control (TRACON) managed the airspace surrounding the airport to support landings.

The Federal Aviation Administration (FAA) stated on the 19th that the incident was caused by air traffic control staffing issues. The FAA explained that when staffing is insufficient, it takes measures to reduce the number of arriving flights per hour to ensure safety. Air traffic control operations normalized that morning.

At Burbank Airport, control tower operations were previously suspended for about 6 hours on October 6 of last year due to air traffic control staff shortages resulting from the federal government shutdown.